- Kamikazi on My different multicopter flight controllers compared
- Alex on Change lens on your Gopro HD to a Sunex DSL355A-650-F2.8
- Gabe on Contact
- Erman Ozen on New multicopter motor – MT 3506 650kv from Tiger Motors (T-motor)
- Glenn Wills on OpenPilot Countdown
TagsAerial photography Arducopter Arducopter 2 Mega Camera Camera Mount Carbon CopterControl crash DIY Equipment ESC FPV - First Person View Gopro HD Hexacopter KKmulticopter Mikrokopter multicopter Multicopter Frames Multicopter Motors Multiwii OpenPilot PPM propeller Quadrocopter Software Sunex DSL355A-650-F2.8 Transmitter Turnigy Video Y6
Posted on 2012/05/04 | No CommentsI have now made some navigation lights for my large Y6 multicopter. There is a standard for all vessels that says red light on left, green light on the right...
Posted on 2011/09/30 | 12 CommentsMy large heavy lift Y6 multicopter, that I have built for aerial photography and videography, is now finished. First time I flew it I used my KKmulticopter board which I...
Posted on 2011/07/29 | 1 CommentI’m not done building my large carbon Y6 multicopter. Until then I will fly around in my smaller ghetto Y6 multicopter. The center plate is made of carbon fiber and...
Posted on 2011/07/29 | 7 CommentsThis is a quick review and my first impressions of the XL Y6 carbon frame from RC-carbon. I will write a more detailed review when I have my Y6 up...
Posted on 2011/05/24 | 9 CommentsI’ve been looking for a good motor for my heavy lift Y6 hexacopter. One motor that got my attantion was the Avroto 2814-11 short shaft 770kv. The short shaft makes...
Posted on 2011/05/19 | No CommentsYesterday I ordered the multicopter frame for my larger multicopter that I will use for aerial photography and videography. After analyzing my needs I decided to buy a foldable Y6...