- Kamikazi on My different multicopter flight controllers compared
- Alex on Change lens on your Gopro HD to a Sunex DSL355A-650-F2.8
- Gabe on Contact
- Erman Ozen on New multicopter motor – MT 3506 650kv from Tiger Motors (T-motor)
- Glenn Wills on OpenPilot Countdown
TagsAerial photography Arducopter Arducopter 2 Mega Camera Camera Mount Carbon CopterControl crash DIY Equipment ESC FPV - First Person View Gopro HD Hexacopter KKmulticopter Mikrokopter multicopter Multicopter Frames Multicopter Motors Multiwii OpenPilot PPM propeller Quadrocopter Software Sunex DSL355A-650-F2.8 Transmitter Turnigy Video Y6
Posted on 2012/10/24 | 1 CommentToday I noticed that there is a huge countdown covering the start page at http://openpilot.org/ I also noticed that the Revo board -thread is closed for upcoming news. One can’t be...
Posted on 2012/01/12 | 2 CommentsI have previously written about some different ways to use PPM with Turnigy 9X. The easiest way seemed to be binding it with a Hobby King TR6A-V2 reciever and then...
Posted on 2011/10/30 | 18 CommentsI have tried some different flight controllers for my different multicopter projects. I have only used open source flight controllers, and none of the commercial ones such as DJI Wooking M,...
Posted on 2011/09/30 | 12 CommentsMy large heavy lift Y6 multicopter, that I have built for aerial photography and videography, is now finished. First time I flew it I used my KKmulticopter board which I...
Posted on 2011/08/15 | No CommentsToday I have pre-ordered an Open Pilot Copter Control flight control board from FlyingWings. I am very excited about this control board. As far as I have seen it performs...
Posted on 2011/06/02 | 3 CommentsOpen Pilot is a new flight control platform for multicopters. As I understand it has a faster and generally better performing hardware than e.g arduino based platforms such as Arducopter...