Recent Comments
- James H. Groff Sr. on Solution for Turnigy 9X switch error
- Will D on Solution for Turnigy 9X switch error
- MIke Hancoski on Multicopter throttle curve
- Leo on Solution for Turnigy 9X switch error
- Greg Medve on OSRC Open Source Remote Control
Tags
Aerial photography Arducopter Arducopter 2 Mega Camera Camera Mount Carbon collective pitch CopterControl crash DIY Equipment ESC FPV - First Person View Gopro HD gopro karma Hexacopter KKmulticopter Mikrokopter multicopter Multicopter Frames Multicopter Motors Multiwii OpenPilot PPM propeller Quadrocopter Software Sunex DSL355A-650-F2.8 Transmitter Turnigy Video Y6RC Links
Photography & Videography Links
Gadgets and tech links
Latest Headlines
-
My micro Y6 multicopter
Posted on 2011/07/29 | 1 CommentI’m not done building my large carbon Y6 multicopter. Until then I will fly around in my smaller ghetto Y6 multicopter. The center plate is made of carbon fiber and... -
DIY rubber bands for propsavers
Posted on 2011/07/29 | No CommentsI really like propsavers, but the o-rings are unnecessarily expensive. So I made some DIY replacement rubber bands out of the inner tube of my bike tyre. My tube was... -
Review: XL Y6 carbon frame
Posted on 2011/07/29 | 7 CommentsThis is a quick review and my first impressions of the XL Y6 carbon frame from RC-carbon. I will write a more detailed review when I have my Y6 up... -
Open Pilot and Copter Control multicopter platform
Posted on 2011/06/02 | 3 CommentsOpen Pilot is a new flight control platform for multicopters. As I understand it has a faster and generally better performing hardware than e.g arduino based platforms such as Arducopter... -
Y6 multicopter motor – Avroto 2814 short shaft
Posted on 2011/05/24 | 9 CommentsI’ve been looking for a good motor for my heavy lift Y6 hexacopter. One motor that got my attantion was the Avroto 2814-11 short shaft 770kv. The short shaft makes... -
Photography Portfolio
Posted on 2011/05/23 | No CommentsI got into multicopters because I needed a platform for aerial photography. I did’t have any experience of RC stuff before I got into this, but I have some experience... -
Y6 carbon hexacopter frame
Posted on 2011/05/19 | No CommentsYesterday I ordered the multicopter frame for my larger multicopter that I will use for aerial photography and videography. After analyzing my needs I decided to buy a foldable Y6... -
Multicopter propellers
Posted on 2011/05/18 | No CommentsI have only been flying my multicopter with 10×5 propellers that I bought from Minsoo Kim. Today I was testing out some smaller propellers to see how it would affect... -
Arducopter 2 aka Arducopter Mega
Posted on 2011/05/13 | 3 CommentsToday I ordered a complete and already soldered Ardupilot Mega kit from uDrones. It consist’s of a Ardupilot Mega processor board soldered together with a Ardupilot Mega IMU board. The... -
Lipo battery short circuit
Posted on 2011/05/04 | No CommentsToday I was experimenting with a gyro and a servo for my gyro stabilized camera mount from Hobby King. The gyro and the servo was power by the turnigy receviever,...