Recent Comments
- James H. Groff Sr. on Solution for Turnigy 9X switch error
- Will D on Solution for Turnigy 9X switch error
- MIke Hancoski on Multicopter throttle curve
- Leo on Solution for Turnigy 9X switch error
- Greg Medve on OSRC Open Source Remote Control
Tags
Aerial photography Arducopter Arducopter 2 Mega Camera Camera Mount Carbon collective pitch CopterControl crash DIY Equipment ESC FPV - First Person View Gopro HD gopro karma Hexacopter KKmulticopter Mikrokopter multicopter Multicopter Frames Multicopter Motors Multiwii OpenPilot PPM propeller Quadrocopter Software Sunex DSL355A-650-F2.8 Transmitter Turnigy Video Y6RC Links
Photography & Videography Links
Gadgets and tech links
DIY Archive
-
Gopro lens upgrade modification with Sunex dsl355a-650-f2.8
Posted on 2019/03/19 | No Comments -
HK-TR6A-V2 PPM problem
Posted on 2012/01/12 | 3 CommentsI have previously written about some different ways to use PPM with Turnigy 9X. The easiest way seemed to be binding it with a Hobby King TR6A-V2 reciever and then... -
Turnigy 9x PPM
Posted on 2011/11/28 | 5 CommentsTo fully take advantage of my flight controllers I need to use a PPM signal. My Turnigy 9x doesn’t have a native support for PPM signals, so I need to... -
DIY rubber bands for propsavers
Posted on 2011/07/29 | No CommentsI really like propsavers, but the o-rings are unnecessarily expensive. So I made some DIY replacement rubber bands out of the inner tube of my bike tyre. My tube was... -
DIY heat sink for ESC
Posted on 2011/04/03 | No CommentsFor obvious reasons you don’t want to overheat your ESC while flying your multicopter. By mounting a heat sink on your ESC you will fly more safely. I have made... -
Change lens on your Gopro HD to a Sunex DSL355A-650-F2.8
Posted on 2011/03/05 | 19 CommentsI upgraded the lens on my Gopro camera and the video quality REALLY got improved. The new lens was a Sunex DSL355A-650-F2.8. The reason I did this is because the... -
Assembling the quadcopter frame from Anspe
Posted on 2011/02/01 | No CommentsToday the quadcopter frame from Anspe arrived. I didn’t understand that the holes in the aluminum arms weren’t pre drilled and unfortunately I don’t own a proper drill. So I...